Reusable Flash Camera

Great photos, low cost, ease of use and convenience are some of the factors driving the high sales of this product category. Similar products are designed to be used once and discarded, Snap Sights can be used over and over again. Intended for use indoors or out, night or day. Each camera is tested at the factory for winding and flash operation on top of a variety of other quality control measures. Item #SS03.

• Camera is reusable
• Built in Flash
• 28mm Focus Free lens
• Built in Lens Cover
• Preloaded with 27 exposure 200 ASA film
• Compact size
• Wrist strap included

 Reusable Flash Camera $8.95

Reusable Daylight Camera

Great photos, low cost, ease of use and convenience are some of the factors driving the high sales of this product category. Similar products are designed to be used once and discarded, Snap Sights! Cameras can be used over and over again. Intended for use outdoors in daylight conditions. Item #SS05

• Camera is reusable
• 28mm Focus Free lens
• Preloaded with 27 exposure 200 ASA film
• Compact size

 Reusable Daylight Camera  7.95

Unbeatable Prices!  Please Inquire for Quantities of 10 or More

Color Print Film

Snap Sights offers a range of high quality 35mm Color Print Film. Exceptional color and clarity allow us to provide a “Satisfaction Guarantee.” 24 + 3 exposure rolls.

400 ASA General Use  27 exp.   $3.95

800 ASA Action, Indoor  27 exp.   $4.95

Reloading Intructions

This camera is designed for reusability and is warranted against defects in material and workmanship for 180 days from purchase date. Abuse or misuse of product is not covered under warranty. Special care must be taken when using waterproof products.

1) Press film release button (at bottom of camera).

2) Wind rewind lever (at top of camera) in clockwise direction until film winds free.

3) Lift rewind lever to release film from camera.

4) Remove red sticker and open back of camera to remove exposed film.

5) Insert new film and extend film tip to the right hand winding spool. Make sure holes in film are aligned with wind sprocket gear teeth.

6) Close back of camera and replace red sticker.

7) Advance film to #1 in the frame counter on top of camera. (If the counter does not advance film is not loaded correctly, repeat step 6).