Durable Quality That

This tough and durable camera can be used above/below water, indoors/outdoors, night or day. Its unique features make it a perfect camera for a wide range of sports activities including: Diving, camping, kayaking, fishing, hiking and more! Each camera is individually pressure tested at the factory to 100 feet. Other tests include flash and winding operation. Rigorous quality control is one reason why we are industry leaders in low return rates and customer satisfaction. Item #SS01

Waterproof to 100 feet / 33 meters

Built in Flash

Camera is reusable

Camlock clasp with hinged back.

28m Focus Free Lens

Preloaded with 27 exposure Snap Sights Sports film

Flip up Sports Viewfinder

Pressure resistant shutter button

Shock Resistant, Heavy Duty Housing that floats

Hand strap included

Reusable Flash Camera with Waterproof Housing $19.95

Color Print Film

Snap Sights offers a range of high quality 35mm Color Print Film. Exceptional color and clarity allow us to provide a “Satisfaction Guarantee.” 24 + 3 exposure rolls.

400 ASA General Use 27 exp. $3.95

800 ASA Action, Indoor 27 exp. $4.95

Reloading Instructions

This camera is designed for reusability and is warranted against defects in material and workmanship for 180 days from purchase date. Abuse or misuse of product is not covered under warranty. Special care must be taken when using waterproof products.

1) Lift safety catch on cam lock and twist the cam lock to the open position. Gently open housing and remove camera.

2) Press film release button (at bottom of camera).

3) Wind rewind lever (at top of camera) in clockwise direction until film winds free.

4) Lift rewind lever to release film from camera.

5) Remove red sticker and open back of camera to remove exposed film.

6) Insert new film and extend film tip to the right hand winding spool. Make sure holes in film are aligned with wind sprocket gear teeth.

7) Close back of camera and replace red sticker.

8) Advance film to # 1 in the frame counter on top of camera. (If the counter does not advance film is not loaded correctly, repeat step 6).

9) Make sure that the O-ring seal is clean of sand, dirt or other debris.

10) Align camera in housing, close back and twist cam lock to closed position.

Best viewed with Microsoft Internet Explorer 6+, Netscape Navigator 7+ @ 1024 x 768 Resolution
Copyright 2005 Hawaii Opportunities Group All rights reserved.
All product names throughout this catalog are trademarks of their respective holders. (w2)